ATmega328P not responding


All of the sudden my ATmega328P stopped responding to flash commands with avrdude. Here is the output of the attempt:

the date sheet of atmega328p:http://www.componentschip.com/details/Atmel/ATMEGA328P.html




avrdude -pm328p -P/dev/parport0 -cstk200 -v -F -Uflash:w:./bin/main.hex:i

avrdude: Version 5.11.1, compiled on Oct 30 2011 at 10:41:10
Copyright (c) 2000-2005 Brian Dean,
Copyright (c) 2007-2009 Joerg Wunsch

System wide configuration file is "/etc/avrdude.conf"
User configuration file is "/home/darkhan/.avrduderc"
User configuration file does not exist or is not a regular file, skipping

Using Port : /dev/parport0
Using Programmer : stk200
AVR Part : ATMEGA328P
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PC2
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :

Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 20 4 0 no 1024 4 0 3600 3600 0xff 0xff
flash 65 6 128 0 yes 32768 128 256 4500 4500 0xff 0xff
lfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
efuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
lock 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00

Programmer Type : PPI
Description : STK200
VCC = (not used)
BUFF = 4,5
RESET = 9
SCK = 6
MOSI = 7
MISO = 10
ERR LED = 0
RDY LED = 0
PGM LED = 0
VFY LED = 0

avrdude: AVR device not responding
avrdude: initialization failed, rc=-1
avrdude: AVR device initialized and ready to accept instructions
avrdude: Device signature = 0x000000
avrdude: Yikes! Invalid device signature.
avrdude: Expected signature for ATMEGA328P is 1E 95 0F
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.

avrdude done. Thank you.

make: *** [program] Error 1

I've used this micro for more than 1 year. But I don't think I've depleted its 10000 flash write/erase cycle count.

Last thing I've done was re-programming fuse with Reset Disable programmed:

avrdude -pm328p -P/dev/parport0 -cstk200 -Ulfuse:w:0x62:m -Uhfuse:w:0x59:m -Uefuse:w:0xff:m -i960

How can I bring my micro to life?
Last edited on
Topic archived. No new replies allowed.